How To - Upgrade your Digital Signage app manually

Please follow the steps below to manually upgrade the Digital Signage app version on your LG digital display:

1. Power the LG display on using the remote
2. Open the LG Server Settings
   
   1. To access the Server Settings on the LG SM5KB Series (WebOS 2.0) or LG SM5KC Series (WebOS 3.0):
      
      1. Press and hold the Settings () button on the LG remote control until a chat bubble icon appears in the top-right corner.
         
      2. When bubble icon appears, press 8 0 8 0 then OK on the remote.
   2. To access the Server Settings page on the LG SM5KD Series (WebOS 3.2) or LG SM5KE Series (WebOS 4.0):
      
      1. Press the Settings () button on the remote
      2. In the Settings menu, locate and open EZSettings > SI Server Settings
         
         
3. When you've successfully opened the Server Settings, check the following settings:
   1. Application Launch Mode = Local
      
      
   2. Fully Qualified Domain Name = ON
      
   3. App Download URL:
      1. The custom IPK URL supplied to you via email
         OR
      2. http://digitalcomms.nz/webos/com.lg.app.signage.ipk
   4. File Type = IPK
      
4. To start the app upgrade, set Local Application Upgrade to Remote
   
   Select Confirm
   
   Note: A message will appear on the screen confirming that the upgrade is successful
5. Turn the TV off if the app download is successful. Then turn it back on.
   Note: The Digital Signage app will automatically start after the TV is powered on. Please wait a few seconds until a green screen appears.