Using the LG Remote

Using the LG Remote

Use the following buttons on the LG remote to navigate and control the Vibe.fyi player app:

Open the LG settings


Open the Vibe.fyi player app


Vibe.fyi app controls

 Rewind

Navigate to the previous slide

 Forward

Navigate to the next slide

 Stop 

Stop slides from transitioning

 Play 

Start slides transitioning

 Pause

Temporarily pause slides from transitioning

 Yellow

Show the Vibe app settings

 Blue

Show the Vibe app logs

 Left arrow

Skip to previous slide

 Right Arrow

Skip to next slide

 Up Arrow

Use to skip to the previous slide in the player control > playlist view (see Down arrow).

 Down Arrow

Push to display the player control.

Once controls are visible, use Down button to skip to next slide in the list.

 OK

Navigate to the highlighted slide in the playlist 

When 'settings' are displayed

 Left Arrow

Navigate around the inputs and buttons

 Right Arrow

Navigate around the inputs and buttons

 Up Arrow

Navigate around the inputs and buttons

 Down Arrow

Navigate around the inputs and buttons

 OK

“Click” a button, edit a text field, or toggle a tick box, on screen

Editing a text field in 'settings'

 Left Arrow

Navigate around the on-screen keyboard

 Right Arrow

Navigate around the on-screen keyboard

 Up Arrow

Navigate around the on-screen keyboard

 Down Arrow

Navigate around the on-screen keyboard

 OK

“Click” a key on the on-screen keyboard

0-9 numbers

Enter a number into the text field

Back

Exit out of editing the text field, so that you can continue navigating around the other inputs




    • Related Articles

    • Install Guide - LG WebOS 3.2+

      Read First Pre-Install tips Read the Install Checklist (including hardware & network requirements) To save time, use a Wireless (USB) Keyboard & Mouse Contact your Vibe administrator or Vibe Support team if you have not received the site URL and auth ...

    • Install Guide - LG WebOS2/S3.0

      Read First: Install Checklist - Hardware & Network Requirements Note: it is recommended that you have a Wireless (USB) Keyboard & Mouse to perform this operation. Plug the USB receiver into the USB port on the LG (webOS) display. Supported LG Models ...

    • Vibe.fyi player app & LG firmware updates

      Learn how to manage your LG firmware versions and Vibe.fyi player app updates to optimize your LG Digital Signage device and minimize any disruption to your workplace digital signage. LG Firmware Update via Vibe.fyi player app Power the LG device on ...

    • Remote Device Management (SoC)

      Remote commands can be used to update your Vibe.fyi player app settings and a range of LG (WebOS) SoC, Samsung (Tizen) and Philips (Android) system settings A Vibe admin login is required to perform the steps below. Remote commands cannot be sent to ...

    • Basic Troubleshooting

      Onscreen Display  Content is off centre If the content is off centre, try using the LG remote arrow keys to move the content back into position. Before... After... Video is zoomed in/cut off Try turning tile mode off using the Tile button on your ...