General Error

General Error

WP400+ Devices 

Screen is not showing data from WP devices
  1. Both the WP box and TV are turned on.
  2. The HDMI cable is connected to the HDMI OUT port of the WP box and plugged into the HDMI 1 slot on the TV. (Ensure the HDMI cable is working properly.)
  3. When selecting HDMI 1, make sure you are controlling the TV itself with its remote. If using a universal LG remote, you might be controlling the WP box instead.
  4. Once you connect it to the proper HDMI connection and still not showing Vibe app click on Home button and select Vibe app

    • Related Articles

    • App Log Errors

      Please use this article as a guide if an error is displayed in the Digital Signage app for LG WebOS or Desktop Player App logs. Read First LG (WebOS) SoC: If your screen is running webOS 2.4.5 or higher, you'll have access to friendly error messages ...

    • Install Guide - LG WebOS 3.2+

      Read First Pre-Install tips Read the Install Checklist (including hardware & network requirements) To save time, use a Wireless (USB) Keyboard & Mouse Contact your Vibe administrator or Vibe Support team if you have not received the site URL and auth ...

    • Install Guide - Philips (Android) D-Line series

      Read First - Install Checklist - Hardware & Network Requirements Note: it is recommended that you have a Wireless (USB) Keyboard & Mouse to perform this operation. Plug the USB receiver into the USB port. Supported Philips models Purchase one of the ...

    • Network Connection and Display Settings

      When your Intel NUC media player (Linux) arrives, the following settings will be preconfigured: Digital Signage app installed and preconfigured with your unique licence key On/Off timers Desktop background image Remote Management software installed ...

    • How To - Configure WebOS DNS settings

      In order to connect to the internet, you're screen needs to have it's DNS settings correctly setup. For best results, we recommend using Google's DNS service. Please see the below steps to set the DNS to Google's. Step 1: Open the settings on your ...