How To: Uninstall the Digital Signage app / Perform a Factory Reset

How To: Uninstall the Digital Signage app / Perform a Factory Reset

NB: If you need assistance with your Vibe channel, please contact support@vibe.fyi

Uninstall the Digital Signage app

  1. Using the remote:
    1. Power on the Philips commercial display
    2. To enter Admin Mode, press in sequence “Home 1 8 8 8” 
    3. In Admin mode, open Settings

    4. In the Apps menu, select Digital Signage

    5. Choose Uninstall

    6. Choose OK to confirm uninstall

Use this guide to reinstall the Vibe.fyi player app

Perform a Factory Reset

  1. Using the remote:
    1. Power on the Philips commercial display
    2. To enter Admin Mode, press in sequence “Home 1 8 8 8” 
  2. In Admin mode, open Settings

  3. In the System Tools menu, select Factory Reset

  4. In the Factory Reset page, choose Factory Reset

  5. Choose OK to confirm the reset.

    • Related Articles

    • How To - Perform a Factory Reset

      If the support team have suggested that a factory reset is required on your supported LG digital signage display, please locate your screen below and follow the steps: WebOS v2.0 (SM5KB series) / WebOS v3.0 (SM5KC series) Press and hold the Settings ...

    • Setup Guide - Meeting Room Signage

      What you'll need To set up your LG WebOS meeting room digital signage system, you will need the following: Supported LG WebOS System-on-Chip (SoC) hardware (running WebOS v3.2 and above) If you don't have a LG Commercial screen with WebOS 3.2 or ...

    • Supported Digital Signage Devices

      Use this article as a guide for purchasing a supported Digital Signage device to run your Vibe channel. LG WebOS (SoC) Vibe.fyi recommends LG commercial screens running System on Chip (SoC) technology as the most robust, reliable and secure solution ...

    • App Log Errors

      Please use this article as a guide if an error is displayed in the Digital Signage app for LG WebOS or Desktop Player App logs. Read First LG (WebOS) SoC: If your screen is running webOS 2.4.5 or higher, you'll have access to friendly error messages ...

    • Install Guide for Philips (Android) Browser app

      Read First - Install Checklist - Hardware & Network Requirements We recommend using a Wireless (USB) Keyboard & Mouse to perform this operation. Plug the USB receiver into the USB port. Supported Philips models Purchase one of the following supported ...