Setting Up LG WebOS 3.2+ with Vibe.fyi using IPK URL
Read First
Pre-Install tips
To save time, use a Wireless (USB) Keyboard & Mouse
Contact support@vibe.fyi if you have not received the site URL and auth code(s).
Please make sure you have Lg remote with you. To buy a new one please refer to this linkLG supported models
If you have purchased one of the following supported LG digital signage models, please use the setup steps below:
- webOS 6.0 - UH5, SM5J, UL3J series
- webOS 4.1 - UH5F, UM3F series
- webOS 4.0 - SM5KE Series
- webOS 3.2 / WebOS 3+ - SM5KD Series
- LG Physical Media Players - WP400 (WebOS 4.0) & WP402 (WebOS 4.2)
Installation Guide
First time LG setup
For LG Commercial screens
- Remove the badge from the base of the screen (Screwdriver required)
For Portrait screen (Latest model) - The screen should be orientated Right Side Down (rotate clockwise)
Using the LG remote, power the screen on and open the LG menu/settings.
In the settings, activate the following:
Network (choose one of the options below):
Fixed - Plug the ethernet cable in (recommended)
WiFi - Open General > Network and connect to a strong WIFI network
3G/4G - Plug your USB dongle with an active sim card into an available USB portal
NB: When using a USB device, open the LG Admin settings (try 4 or 5 zeros to access) and enable the USB lock option.
*Date/Time* - Open General > Date & Time and
Set the correct timezone (e.g. Oceania > New Zealand > Auckland)
Turn the Set Automatically' setting on
Optional - Change White Balance to Mall/QSR
Power Settings - Open General > Power > Brightness > AUTO (High Bright Screens only)
Optional - You also have the option of adding an on/off schedule using the LG system settings. You will need the LG remote to perform this update.
Push the settings button on the remote
- Locate and select the On/Off scheduler in the EZ Settings menu
- Set your timers as needed
e.g. for daily restarts we recommend setting a 3am off timer and 3.05am on timer
The date and time Should be properly set according to the location of the installation or dynamic contents and the Screen ON/OFF timer will not work as it is supposed to be
For LG Digital Signage WebOS box
Remove from packaging and connect;
The power cable
HDMI cable to the HDMI port and to the HDMI 1 port on the display
Remote sensor to the IR IN port
LAN cable (if not using WiFi)
- Using the LG remote, power the screen on and open the LG menu/settings.
- In the settings, activate the following:
- Network:
- Fixed - Plug the ethernet cable in (recommended)
- WiFi - Open General > Network and connect to a strong WIFI network
- 3G/4G - Plug your USB dongle with an active sim card into an available USB portal
NB: When using a USB device, open the LG Admin settings (try 4 or 5 zeros to access) and enable the USB lock option.
- *Date/Time* - Open General > Date & Time and
- Set the correct timezone for your current screen location
E.G. for screens located in New Zealand set to Oceania, New Zealand, Auckland - Turn the Set Automatically' setting on
The date and time Should be properly set according to the location of the installation or dynamic contents and the Screen ON/OFF timer will not work as it is supposed to be
Download the Vibe.fyi player app
4) Disable the Play via URL setting
![](https://support.vibe.fyi/galleryDocuments/edbsn7da47de16ee9be16e1f7aa21c672638a9aaafc4db036bba953e417e0403b111349b9f2ac8f8b49baff95c330d5cf2cfb2d17dfe2ae33c078917fd51137a51e4a?inline=true)
To setup your workplace digital signage, download and install the Vibe.fyi player app on your LG SoC commercial display or media player.
- Press the Settings (
) button on the LG remote
- In the menu, open Ez Settings and select SI Server Setting
![](https://support.vibe.fyi/galleryDocuments/edbsnc2783215bf54cccdf130bdd68b68ba723367308a3b671928d035c0b16c89dfe4a388c46261b723718af0e6496c2902e094f10a8e2c82454bd37d110704abec86?inline=true)
- In the SI Server Setting page, apply the following settings to download the Vibe.fyi player app:
![](https://support.vibe.fyi/galleryDocuments/edbsnc2783215bf54cccdf130bdd68b68ba72ba0a560854217d3588335239f5bacf88c2cfce6a4eddbcbb8c960e26c4ff43e50d3b53a1f37e2e44b6b1bae0d2c4592f?inline=true)
Fully Qualified Domain Name - Select ON and enter the WEBOS IPK URL download URL:
https://download.vibe.fyi/webos/app.ipk?[your site]&[Authcode]
(You should be able to get WEBOS IPK URL from the Admin console. See article)
NB: If you are sent a custom Download URL use that instead- Application Launch Mode - Select Local
- File or Application Type - Select IPK
- Local Application Upgrade - Select Remote
- Select Confirm
![](https://support.vibe.fyi/galleryDocuments/edbsnc2783215bf54cccdf130bdd68b68ba7271b38c8db378d09406de822029820c248031b7961fe2d5c174072a7a2e67dc4d8d9edefa0e586b41cfb1cd18a92379bf?inline=true)
- After a successful download/install, select OK
![](https://support.vibe.fyi/galleryDocuments/edbsnc2783215bf54cccdf130bdd68b68ba72f219cd50d6afaa4e760be40498ce84f3ee924083b7ff07a3b92d1e54d76dc66051529c5f6aa1fc3b167ba27dc3e40a90?inline=true)
- Use the LG remote to restart the TV (power off, then on).
Press the
BLUE button on the remote to check the logs to see if slides downloaded successfully.
(If you are using a keyboard please click the F2 to access logs(Blue button) F4 to access vibe settings(Yellow button))
![](https://support.vibe.fyi/galleryDocuments/edbsn5153ef8f1092eae0878e613cdd77bc55e24d4981155420aab3e794f0733cc045ca5ac4effe7cf1357461345e9867adef4e9d7ca1ddad3b320ca97c13651922c1?inline=true)
If you need to update the firmware or App version Click on the Advanced Commands and select the necessary option
Install Troubleshooting Tips
General
- App not syncing or downloading? 'Get auth token error' showing in the logs?
If the auth code you've entered is confirmed as correct, check the LG Settings > General > Time & Date settings. The timezone and date/time must be accurate in order for the app to function correctly.
![](https://support.vibe.fyi/galleryDocuments/edbsnaaf2ae9c11e411b0863d89a4625a2ba8b2b97326458486a2e454b00c1ebf473a731586572361d056f4361539e69ab8c8dde50b24e3c191f58349bfea46794fd1?inline=true)
![](https://support.vibe.fyi/galleryDocuments/edbsnaaf2ae9c11e411b0863d89a4625a2ba8faa588f86a649e688adb9f0e89ed780901e9501138c9256875511baedd59664f705f022a93d5433abc5c1b050a3a43b7?inline=true)
- If the Vibe.fyi player app settings do not open automatically after restarting your screen, press the YELLOW button on the remote to open the settings manually.
![](https://support.vibe.fyi/galleryDocuments/edbsn5153ef8f1092eae0878e613cdd77bc55d4cc58fa5e82ccc71f4ea97461c06201d9117c9ebd9aff48c761a65c099213c6713428db0dd4bde8435ee07cadc0df4c?inline=true)
- Enter the proper Credentials
LG WebOS6
- If an error occurs during the first sync and save attempt, try restarting the screen.
- If a -10 network error occurs after you have installed the Vibe.fyi player app, try upgrading the LG firmware.
![](https://support.vibe.fyi/galleryDocuments/edbsn09e0cff676f2cd0cd747fe3dc39fa3b2c8cfaacc9afa0bdfc979db38847538cd254dd8621a49aa3a22e865c1c0c85124bc1fc63e6c2a6513c523dcf19d8c2a0b?inline=true)
Alternative install: Use a USB storage device
Create a new folder on your USB drive:
- Plug the USB flash drive into a USB port on your computer and create an Application folder
- Download the latest app version from https://download.vibe.fyi/webos/app.ipk
- When the download is complete, eject your USB flash drive
![](https://desk.zoho.com.au/galleryDocuments/edbsn246edfd21a9e848ea0ccff689f229c5de4d0e69f6aa64dc8da95f1cec6edd786adb35dc967137c03fb8c48528084a33875cdb40154387be1667fa08e690c0352?inline=true)
Next,
- Insert the USB device into the USB port on your LG WebOS screen
Using the remote, power the display on and open EZSettings > SI Server Settings
- Set Application Launch mode to Local
- Set Application Type to IPK
- Set Location Application Upgrade to USB
![](https://desk.zoho.com.au/galleryDocuments/edbsn246edfd21a9e848ea0ccff689f229c5d18a7aa61e68cb3b40bd65e87f812e7fcd53e0393ea73c3ab05e36012a0683a71454b85c99a85360561122dccafe11d15?inline=true)
- Select [Confirm] to start the install
- When the installation is complete, use the remote to power the screen off then on and wait a few seconds for the app to launch
Related Articles
Install Guide - LG WebOS3.2/4.0+/6.0
Read First Pre-Install tips Read the Install Checklist - Hardware & Network Requirements To save time, use a Wireless (USB) Keyboard & Mouse Contact support@vibe.fyi if you have not received the site URL and auth code(s). Please make sure you have Lg ...
Install Guide - LG WebOS2/S3.0
Read First: Install Checklist - Hardware & Network Requirements Note: it is recommended that you have a Wireless (USB) Keyboard & Mouse to perform this operation. Plug the USB receiver into the USB port on the LG (webOS) display. Supported LG Models ...
Vibe.fyi player app & LG firmware updates
Learn how to manage your LG firmware versions and Vibe.fyi player app updates to optimize your LG Digital Signage device and minimize any disruption to your workplace digital signage. LG Firmware Update via Vibe.fyi player app Power the LG device on ...
How To - Troubleshoot an error in the App logs
If your screen is running webOS 2.4.5 or higher, you'll have access to new friendly error messages that help you troubleshoot any communication or authentication errors. Please use this article as a guide if an error is displayed in the Digital ...
Using the LG Remote
Use the following buttons on the LG remote to navigate and control the Vibe.fyi player app: Open the LG settings Open the Vibe.fyi player app Vibe.fyi app controls Rewind Navigate to the previous slide Forward Navigate to the next slide Stop Stop ...